Specifications

PARAMETER 2
2-93
Classification
USER
Display title
LINE/FACE/3D
Address Meaning Description
Element that automatically determines an
escape distance in the Z-direction tapered
escape scheme
Program type M
Conditions Immediate
E36
Unit
10%
Setting range
0 to 10
The escape distance value to be used in the Z-direction tapered escape
scheme after tapered machining is automatically determined by the
parameter as follows:
Escape distance =
Tool dia. ×
E36
10
Escape distance
Clearance Z
Amount of return of pecking in the Z-axial
pecking mode of face machining
Program type M
Conditions After stop of movement
Micron
0.001 mm
0.0001 inch
Submicron for
rotational axis
0.001 mm
0.0001 inch
E37
Unit
Submicron for
all axes
0.0001 mm
0.00001 inch
Setting range 0 to 99999999
This parameter indicates the amount of return of pecking in the Z-axial
pecking mode of face machining.
MPL058
Pecking
E37
E37
Returning feed rate of pecking in the Z-axial
pecking mode of face machining
Program type M
Conditions Immediate
E38
Unit
0.01 mm/rev
0.001 inch/rev
Setting range 0 to 9999
Set the returning feed rate of the pecking in the Z-axial pecking mode
during the face machining.
Feed rate
[1] Cutting (G1) F command
[2] Pecking (G1)
E38
[3] Cutting (G1) F command
Note:
This value will be handled as100 if 0 is set here.
—
Program type —
Conditions —
E39
to
E54
Unit —
Setting range —
Invalid
[1]
[2]
[3]
Return to Library