Specifications

2 PARAMETER
2-94
Classification
USER
Display title
LINE/FACE/3D
Address Meaning Description
3-D
Axial cutting-feed overriding
Program type M
Conditions Immediate
E55
Unit 10%
Setting range 0 to 9
Feed overriding for cutting a workpiece in an axial direction using a 3-D
unit
High-speed rough processing Finish processing
Example:
MPL041
E59
Depth of cut
FR ×
E55
10
FR ×
E55
10
Note:
Feed overriding is invalid when this parameter is 0.
3-D
Inversion check of curved-surface pattern
Program type M
Conditions Immediate
E56
Unit —
Setting range 0, 1
This parameter is used to select whether or not an alarm message is to be
displayed if the curved surface of a defined pattern points in the – Z
direction (normally, processing becomes impossible).
0: No alarm
1: Alarm
The curved surface of a
defined pattern points in
the – Z direction
+X
+Z
Example:
MPL042
Note:
This parameter is invalid during high-speed rough processing.
3-D
Severity check of cutting pitch
Program type M
Conditions Immediate
E57
Unit —
Setting range 0, 1
This parameter is used to select whether or not processing is to be
performed in strict accordance with the tool-sequence pitch data setting.
0: The pitch setting is not strictly observed.
1: The pitch setting is strictly observed.
Notes:
1.
This parameter is invalid during high-speed rough processing.
2. The operation time becomes long if this parameter is set to 1.
3-D
Tool-diameter compensation
Program type M
Conditions Immediate
E58
Unit —
Setting range 0, 1
This parameter is used to select whether or not 3-D tool-diameter
compensation according to tool data is to be made for the curved surface
of a defined pattern
0: Diameter compensation made
1: Diameter compensation not made
Diameter compensation
not made
Diameter compensation
made
Pattern
Pattern
Example:
MPL043
Return to Library