Specifications

PARAMETER 2
2-95
Classification
USER
Display title
LINE/FACE/3D
Address Meaning Description
3-D
Allowance of axial-cutting start position
Program type M
Conditions Immediate
E59
Unit 0.1 mm/0.01 inch
Setting range 0 to 999
Element used to set the position in which the cutting feed in axial direction
is to be started after the tool has been moved from the initial point toward
the workpiece at a rapid feed rate
Normal-speed or high-speed
rough processing
Finish processing
Pattern
Workpiece
Material height
E59
E59
Example:
MPL044
3-D
Normal cutting allowance
Program type M
Conditions Immediate
E60
Unit 0.1 mm/0.01 inch
Setting range 0 to 999
The 3-D finish processing (cutting) allowance in the direction of the normal
with respect to the defined pattern of the curved surface
E60
E60
Example:
MPL045
3-D
Search length for parallel cutting
Program type M
Conditions Immediate
E61
Unit 0.1 mm/0.01 inch
Setting range 0 to 999
3-D
Search length for right-angle cutting
Program type M
Conditions Immediate
E62
Unit 0.1 mm/0.01 inch
Setting range 0 to 999
The length of a short line segment which determines the next
approximation point for tool-path creation
Depending on the tool-sequence selected:
E61 is applicable for //-1 or //-2, or
E62 is applicable for -1 or -2
This value will be handled as 0.1 mm (or 0.01 inch) if 0 is set here.
Return to Library