Specifications

ManualsBrandsSafetySpeed ManualsPower Tool6800(P6)

111

112

113

114

115

116

117

118

119

120

PARAMETER 2

2-101

Classification

USER

Display title

LINE/FACE/3D

Address Meaning Description

Tool-path pattern selection for end milling-

mountain unit

Program type M

Conditions Immediate

E91

Unit Bit

Setting range Binary, eight digits

0: Machining from inside to outside

1: Machining from outside to inside

0: Cutting direction inversed

1: Cutting direction fixed

0: The R-point height is set always to

E9.

1: The R-point height is set to

E7 or E9 when

there is or isn’t pre-machining in the same unit,

respectively.

0: The clearance on X-Y plane is set always to

E2.

1: The clearance on X-Y plane is set to

E5 or E2

when there is or isn’t pre-machining in the

same unit, respectively.

1: Rapid feed up to the intended surface +

0: Tool path based on inside shape

1: Tool path based on outside shape

Notes:

If bit 0 = 0, tool path based on inside shape is selected automatically,

irrespective of value of bit 7.

2. If bit 0 = 1 and bit 7 = 0, fixed direction of cutting is selected

automatically, irrespective of value of bit 1.

3. Bit 4 becomes valid only for two or more rounds of cutting.

MPL055

Initial point

Bit 4 = 0 Bit 4 = 1

1st cutting

2nd cutting

Tool-path pattern selection for pocket

milling unit