Specifications

2 PARAMETER
2-102
Classification
USER
Display title
LINE/FACE/3D
Address Meaning Description
Tool-path pattern selection for pocket
milling-mountain unit
Program type M
Conditions Immediate
E93
Unit Bit
Setting range Binary, eight digits
0: Machining from inside to outside
1: Machining from outside to inside
0: Cutting direction inversed
1: Cutting direction fixed
0: The R-point height is set always to
E9.
1: The R-point height is set to
E7 or E9 when
there is or isn’t pre-machining in the same unit,
respectively.
0: The clearance on X-Y plane is set always to
E2.
1: The clearance on X-Y plane is set to
E5 or E2
when there is or isn’t pre-machining in the
same unit, respectively.
1: Rapid feed up to the intended surface +
E9
Tool-path pattern selection for pocket
milling-valley unit
Program type M
Conditions Immediate
E94
Unit Bit
Setting range Binary, eight digits
0: Machining from inside to outside
1: Machining from outside to inside
0: Cutting direction inversed
1: Cutting direction fixed
0: The R-point height is set always to
E9.
1: The R-point height is set to
E7 or E9 when
there is or isn’t pre-machining in the same unit,
respectively.
0: The clearance on X-Y plane is set always to
E2.
1: The clearance on X-Y plane is set to
E5 or E2
when there is or isn’t pre-machining in the
same unit, respectively.
1: Rapid feed up to the intended surface +
E9
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
Return to Library