Specifications

2 PARAMETER
2-110
Classification
USER
Display title
EIA/ISO
Address Meaning Description
Vertical length of coordinate rotation
Program type —
Conditions At power on
F17
Unit 0.001 mm/0.0001 inch
Setting range 0 to ±99999999
Vector of coordinate rotation (axis of ordinate)
Angle of coordinate rotation
Program type —
Conditions At power on
F18
Unit 0.001°
Setting range 0 to ±180000
Maximum permissible difference in arc
radius
Program type M, E
Conditions Next block
F19
Unit
0.001 mm/0.0001 inch
(0.001°)
Setting range 0 to 9999
Maximum radius difference that causes spiral interpolation to be
performed when the arc-drawing start point and end point radii that have
been specified in the arc command do not agree.
MPL060
R
≤
F19
: Spiral interpolation
R >
F19
: Alarm
Specified end point
Center
End point
according to
start point
R
Start point
Fixed value of scaling factor
Program type E
Conditions Next command
F20
Unit 1/1000000
Setting range 0 to 99999999
That fixed value of the scaling factor which becomes valid in the case that
no value is set (using the address P) in the same block as that of G51.
MPL061
Scaling factor =
b
a
Machining
pattern
b
a
Scaling center
Program pattern
Return to Library