Specifications

2 PARAMETER
2-112
Classification
USER
Display title
EIA/ISO
Address Meaning Description
Threading chamfering angle
Program type E
Conditions Immediate
F28
Unit 1°
Setting range 45, 60
Set chamfering angle at thread portion in thread cutting cycle.
G76 and G92 are used for threading cutting cycle, if
F30 is set to 0.
G276 and G292 are used for threading cutting cycle, if
F30 is set to 1.
NM211-00219
F28
Chamfering data
Note:
Set 45 or 60.
Override value of automatic corner
overriding (G62)
Program type E
Conditions Next command
F29
Unit 1%
Setting range 0 to 100
The override value of automatic corner overriding using the G62 code
MPL064
Specified feed rate FF ×
100
F29
Note:
The automatic corner overriding is invalid when this parameter is 0.
G-code type
Program type E
Conditions At power on
F30
Unit Decimal number
Setting range 0, 1
Selecting a G-code type
0: G-code series for machining centers
1: G-code series for turning machines
Settings other than the above are all handled as 0.
Note:
Do not disturb the default setting. It is a fixed value for your machine
model.
—
Program type —
Conditions —
F31
to
F39
Unit —
Setting range —
Invalid
Return to Library