Specifications

PARAMETER 2
2-115
Classification
USER
Display title
EIA/ISO
Address Meaning Description
—
Program type —
Conditions —
F67
F68
Unit —
Setting range —
Invalid
EIA/ISO program restart method
Program type E
Conditions Immediate
F69
Unit —
Setting range 0, 1
This parameter is used to select the method of specifying the EIA/ISO
program restarting position. Two methods are available:
0: The whole program, including the subprograms, is subjected to this
processing. Set the sequence number, block number and number
of times of repetition as searched from the beginning part of the
main program.
1: The subprogram including the desired restart position can be
specified. After setting the work number of the corresponding
program, set the sequence number, block number, and number of
times of repetition as searched from the beginning part.
Availability of multiple-machining and
designated number of repetitions in the
EIA/ISO subprogram
Program type —
Conditions —
F70
Unit —
Setting range 0, 1
When the EIA/ISO program is called up as a subprogram, this parameter
is used to validate/invalidate multiple-machining and the specified number
of times to restart the program.
0: Multiple-machining is effective for the EIA/ISO subprogram.
Specified number of times to restart the EIA/ISO subprogram is
effective.
1: Multiple-machining is ineffective for the EIA/ISO subprogram.
Specified number of times to restart the EIA/ISO subprogram is
ineffective.
Machining order control
Program type M
Conditions Immediate
F71
Unit —
Setting range 0, 1
Tool priority and multiple-machining priority selection
0: Identical-tool priority function is executed first.
1: Multiple-machining function is executed first.
Example:
Multiple-machining of two workpieces using a spot drill
MPL065
F71
= 1
F71
= 0
Return to Library