Specifications

PARAMETER 2
2-117
Classification
USER
Display title
EIA/ISO
Address Meaning Description
B-code execution time for time study
Program type M, E
Conditions Immediate
F76
Unit 0.01 sec.
Setting range 0 to 10000
The tool-path check time study time that is accumulated each time a B-
code is output.
Basis rate for tool life judgment
Program type M, E
Conditions Immediate
F77
Unit %, min
Setting range 0 to 9999
The basis rate for the NC to judge whether the tool is to be displayed in
reverse display mode on the
TOOL DATA display to indicate that the life
of that tool is approaching expiry.
If bit 2 in
F82 is 0:
When the rate of the operation time to the estimated life exceeds the
setting of the
F77 parameter, the NC will judge the tool to be approaching
expiry.
If bit 2 in
F82 is 1:
When the residual life decreases below the setting of the
F77 parameter,
the NC will judge the tool to be approaching expiry.
Note:
The above judgment function is invalid if this parameter is set to 0.
Selection of separating ratio of graphic
display
Program type M, E
Conditions Immediate
F78
Unit —
Setting range 0, 1, 2
Selection of separation ratio between side view and front view (or rear
view) when two split plane indication mode has been selected.
F78 = 0...................... 1:1
F78 = 1...................... 2:1
F78 = 2...................... 5:1
Example: F78 = 1
NM211-00217
Graphic display
2 : 1
Side view
Front view
Return to Library