Specifications

PARAMETER 2
2-119
Classification
USER
Display title
EIA/ISO
Address Meaning Description
—
Program type M, E
Conditions At power on
F81
Unit Bit
Setting range Binary, eight digits
Program management function
0: Normal
1: Editing prohibited (in 9000’s)
Program management function
0: Normal
1: Dieplaying prohibited (in 9000’s)
Fixed value (0)
Add-in MAZATROL
0: Invalid
1: Valid
Program management function
0: Normal
1: Editing prohibited (in 8000, 9000’s)
Program management function
0: Normal
1: Displaying prohibited (in 8000, 9000’s)
Retaining the program transfer settings
0: Invalid
1: Valid
Input error prevention function
0: Invalid
1: Valid
—
Program type M
Conditions Immediate
F82
Unit Bit
Setting range Binary, eight digits
0: Characteristics estimation result graph
display off
1: Characteristics estimation results graph
display on
Selection of inch/metric representation in
POSITION display, TOOL DATA display, and
TOOL OFFSET display modes
0: Invalid
1: Valid
Basis for tool life judgment
0: Whether the rate of the operation time to the
estimated life is greater than the setting of the
F77 parameter
1: Whether the residual life is less than the
setting of the
F77 parameter
X-axis diameter display on the
POSITION display
0: Invalid
1: Valid
Specify whether the stored tools registration
function on the
VISUAL TOOL MANAGEMENT
display is to be made valid or invalid when the
visual tool ID/data management functions are valid
0: Invalid
1: Valid
Note:
Bit 1 in parameter F82 is valid only when an inch/metric unit system
change simplifying function (option) is provided.
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
Return to Library