Specifications

PARAMETER 2
2-121
Classification
USER
Display title
EIA/ISO
Address Meaning Description
—
Program type M, E
Conditions At power on
F84
Unit Bit
Setting range Binary, eight digits
Tool offset data is taken into account for the
current-position counter during execution of EIA
programs
0: No
1: Yes
Fixed cycle (B
→ J)
0: B
1: J
Spare tool search for EIA
0: Group number assignment
1: Tool number assignment
Timing to validate new workpiece offset data
specified with a system variable
0: Valid when the workpiece offset is specified
after a system variable is entered.
1: Valid immediately after a system variable is
entered.
Machine coordinate system (G92) selection
0: M32, M PLUS, M640M, or M640M Pro system
1: M2 system
Incremental/absolute data command in high-speed
machining mode
0: Always incremental data command
1: Based on the modal G90/G91 command valid
before high-speed machining mode is turned
on
Tape operation
0: Not operated until the buffer is full.
1: Operated at a unit of EOB.
When no tool data has been designated during
EIA/ISO program execution with the MAZATROL
tool length data validated.
0: Operation is executed.
1: Alarm state
7 6 5 4 3 2 1 0
Return to Library