Specifications

PARAMETER 2
2-123
Classification
USER
Display title
EIA/ISO
Address Meaning Description
—
Program type M, E
Conditions At power on
F86
Unit Bit
Setting range Binary, eight digits
Output of M250 (Spindle Speed Confirmation)
before a turning feed
0: Not to output
1: To output
Milling-spindle start timing for a milling unit (with
MILL&TURN. set under TYPE of UNo. 0)
0: After tool change
1: At the initial point
Override scheme for G0 during tool tip point control
0: Override valid for the movement of the tool tip
point
1: Override valid for the clamping speed at the
machine control point
Display of the
PART SHAPE window
0: Display on the X-Y plane
1: Display on the X-Z plane
Override scheme for G1 during tool tip point control
0: Override valid for the movement of the tool tip
point
1: Override valid for the clamping speed at the
machine control point
Selection of rotary axis reference position for tool
tip point control
0: Position during the start of tool tip point control
1: Position with the rotary axis at 0 degrees
Display format of
REMAIN on the POSITION display
0: Displayed in the axial system that actually
moves (machine coordinate system).
1: Displayed in the programming coordinate
system corresponding to the angle of the B-axis.
- bit 2 = 0
Makes the override function valid for the movement of the tool tip point.
Tool tip point
- bit 2 = 1
Makes the override function valid for the clamping speed at the machine
control point.
If the moving speed of the axis exceeds the setting of machine
parameter
M1 (i.e., the maximum rapid feed rate), the override function
will work for that setting.
Machine control point
7 6 5 4 3 2 1 0
Return to Library