Specifications

2 PARAMETER
2-130
Classification
USER
Display title
EIA/ISO
Address Meaning Description
Selection of G-code of the coordinates
system to be used in the EIA conversion
function
Program type M, E
Conditions Immediate
F97
Unit —
Setting range 0 to 255
To select G-code modal of the coordinates system to be used in the EIA
conversion function.
Number of macro variable to be used in the
EIA conversion function
Program type M, E
Conditions Immediate
F98
Unit —
Setting range
100 to 199
500 to 999
To specify the number of a macro variable to be used in the EIA
conversion function.
If any macro variable is not used, set to
0.
In case of output with a subprogram in the EIA conversion, the height of
cutting face is set with a macro variable. Set to
F98 the number of the
macro variable to be used.
(S)
(S)
(S)
(S)
(M)
(M)
(M)
(M)
(M)
(M)
(M)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
(S)
MPL504
(M) Main program
(S) Subprogram
Rapid feed
Cutting feed
M
G01Z_;
#_=_;
M98P_H_;
M
M30;
%
N_(_);
M
G00Z_;
X_Y_;
G01Z#_;
XY_;
M
M99;
%
Main program Subprogram
Machining on Z-axis
specified with the variable
Moves to the start point
of the next machining
on Z-axis
Return on Z-axis
Height of
cutting face
To the height of
cutting face
Macro variable (F98)
[Units that use macro variables]
FCE MILL (cutting in one direction), TOP EMIL, POCKET, PCKT
MT
, PCKT VLY
Notes:
1.
3D machining cannot be output using subprograms.
2. Subprogram is output in the absolute mode (G90).
Setting value
Coordinates
system
Setting value
Coordinates
system
5
6
G58
G59
1
2
3
4
G54
G55
G56
G57
Others G54
Return to Library