Specifications

2 PARAMETER
2-138
Classification
USER
Display title
EIA/ISO
Address Meaning Description
Tool life management –
Maximum available wear offset data Y
Program type M, E
Conditions Immediate
F113
(bit 6)
Unit —
Setting range 0, 1
Select whether the maximum available wear offset data Y on the TOOL
DATA display is to be included in the life judgment items listed for the tool
life management function.
F113 (bit 6) = 0:
The maximum available wear offset data Y will be included in the life
judgment items.
F113 (bit 6) = 1:
The maximum available wear offset data Y will not be included in the life
judgment items.
Tool life management –
Maximum available wear offset data Z
Program type M, E
Conditions Immediate
F113
(bit 7)
Unit —
Setting range 0, 1
Select whether the maximum available wear offset data Z on the TOOL
DATA display is to be included in the life judgment items listed for the tool
life management function.
F113 (bit 7) = 0:
The maximum available wear offset data Z will be included in the life
judgment items.
F113 (bit 7) = 1:
The maximum available wear offset data Z will not be included in the life
judgment items.
Selection of the maximum C-axial cutting
feed rate for the inch system
Program type M, E
Conditions Immediate
F114
(bit 0)
Unit —
Setting range 0, 1
Specify the maximum C-axial cutting feed rate that can be selected for the
inch system.
F114 (bit 0) = 0:
The maximum selectable C-axial cutting feed rate is 88 min
–1
(rpm).
F114 (bit 0) = 1:
The maximum selectable C-axial cutting feed rate is 400 min
–1
(rpm).
Selection of the operation occurring during
the control of the tool tip point when
command G49 is issued (when the tool
length offset value is canceled)
Program type M, E
Conditions Immediate
F114
(bit 1)
Unit —
Setting range 0, 1
Select the type of operation occurring during the control of the tool tip point
when command G49 is issued (when the tool length offset value is
canceled).
F114 (bit 1) = 0:
The axis moves according to the tool length offset value.
F114 (bit 1) = 1:
The axis does not move.
.
Return to Library