Specifications

PARAMETER 2
2-141
Classification
USER
Display title
EIA/ISO
Address Meaning Description
Feed rate of the threading runout – Y-axis
Program type M, E
Conditions Immediate
F117
Unit 1 mm/min
Setting range 0 to 240000
Specify the Y-axial feed rate for the runout of the threading cycle.
Feed rate of the threading runout – Z-axis
Program type M, E
Conditions Immediate
F118
Unit 1 mm/min
Setting range 0 to 240000
Specify the Z-axial feed rate for the runout of the threading cycle.
Runout feed rate for the inside diameter
threading cycle
Program type M
Conditions Immediate
F119
Unit 1 mm/min
Setting range 0 to 240000
Specify the runout feed rate for the inside diameter threading cycle.
This parameter is valid only when chamfering is not specified in the inside
diameter threading unit of the MAZATROL program.
Clamping speed for the threading cycle –
X-axis
Program type M, E
Conditions Immediate
F120
Unit 1 mm/min
Setting range 0 to 99999999
Specify the X-axial clamping speed for the threading cycle.
Return to Library