Specifications

PARAMETER 2
2-143
Classification
USER
Display title
EIA/ISO
Address Meaning Description
Permissible data alteration amount 2 for
input error prevention function
Program type M, E
Conditions Immediate
F125
Unit —
Setting range 0 to 99999999
The data input in the following items are checked based on the
permissible data alteration amount set in this parameter.
TOOL DATA:
WEAR COMP. X, WEAR COMP. Y, WEAR COMP. Z
TOOL OFFFSET:
WEAR COMP.
—
Program type —
Conditions —
F126
to
F132
Unit —
Setting range —
Invalid
Pitch of tapping tool for display in detail in
solid mode
Program type M
Conditions Immediate
F133
Unit 0.1 mm/0.01 inch
Setting range 0 to 65535
Set the pitch of tapping tool displayed when the tapping tool is displayed in
detail (F111 bit 0 = 1) in solid mode on TOOL PATH CHECK display.
Thread depth of tapping tool for display in
detail in solid mode
Program type M
Conditions Immediate
F134
Unit 0.1 mm/0.01 inch
Setting range 0 to 65535
Set the thread depth of tapping tool displayed when the tapping tool is
displayed in detail (F111 bit 0 = 1) in solid mode on TOOL PATH CHECK
display.
Return to Library