Specifications

2 PARAMETER
2-144
Classification
USER
Display title
EIA/ISO
Address Meaning Description
Tool-drawing accuracy in solid mode
Program type M
Conditions Immediate
F135
Unit —
Setting range 0 to 9
Specify tool-drawing accuracy in the solid mode of the TOOL PATH
CHECK display.
As the specified value is greater (maximum value: 9), accuracy increases
progressively.
Amount of offset for dummy workpiece
shape in solid mode
Program type M
Conditions Immediate
F136
Unit 0.1 mm/0.01 inch
Setting range –99999999 to 99999999
It is possible to change the size of the workpiece created automatically
when solid mode is selected on the TOOL PATH CHECK display.
Workpiece displayed in
solid display mode
Workpiece automatically set by NC
This offset function is valid for both
X-axial and Y-axial directions.
F136
F136
Y
X
Number of jaws displayed in solid mode for
No. 1 turning spindle
Program type M
Conditions Immediate
F137
Unit Jaws
Setting range 0 to 9
Specify for the solid mode of the TOOL PATH CHECK display the number
of jaws displayed automatically. If 0 is entered, three jaws will be displayed
as standard.
Number of jaws displayed in solid mode for
No. 2 turning spindle
Program type M
Conditions Immediate
F138
Unit Jaws
Setting range 0 to 9
Specify for the solid mode of the TOOL PATH CHECK display the number
of jaws displayed automatically. If 0 is entered, three jaws will be displayed
as standard.
Return to Library