Specifications

PARAMETER 2
2-145
Classification
USER
Display title
EIA/ISO
Address Meaning Description
Angle offset for the jaws displayed in solid
mode for the No. 1 turning spindle
Program type M
Conditions Immediate
F139
Unit 0.1°
Setting range 0 to 3599
Specify for the solid mode of the TOOL PATH CHECK display the amount
of C-axial angle offset for the jaws displayed automatically.
Angle offset for the jaws displayed in solid
mode for the No. 2 turning spindle
Program type M
Conditions Immediate
F140
Unit 0.1°
Setting range 0 to 3599
Specify for the solid mode of the TOOL PATH CHECK display the amount
of C-axial angle offset for the jaws displayed automatically.
—
Program type —
Conditions —
F141
to
F144
Unit —
Setting range —
Not used
Rapid feed override when data alteration is
detected
Program type M
Conditions Immediate
F145
Unit %
Setting range 0 to 100
The rapid feed rate override is reduced to the value set here, when data
alteration is detected.
This value will be handled as100 if 0 is set here.
Return to Library