Specifications

2 PARAMETER
2-148
Classification
USER
Display title
EIA/ISO
Address Meaning Description
—
Program type M, E
Conditions After stop of movement
F162
Unit Bit
Setting range Binary, eight digits
During independent start of tool tip point control
0: Movement according to the particular amount of
offset
1: No movement according to the particular
amount of offset
Type of passage of tool tip point through singular
point
Chamfer/corner R-command address selection
0: (I), (K), (R), (,R), (,C), (,A)
1: (R), (C), (A)
Fixed hole-machining cycle return selection
0: Initial point
1: R-point
6 digits in T-command for turning
Use of the M Pro scheme as the method of
selecting the Length correction axis bit
0: Invalid
1: Valid
MAZATROL program check for missing Z-offset
0: Valid
1: Invalid
Encoder polarity selection
0: Pulse rate increase for forward rotation command
1: Pulse rate reduction for forward rotation command
F162 bit 1 - Type of passage of tool tip point through singular point
0: The same primary rotary axis angle sign as that existing during the
start of tool tip point control is selected as the angle of the rotary axis
for implementing the tool axial vector specified during tool tip point
control.
Example:
C = 180
B
C = 0
B = positive B = positiveB = 0
1: The angle that provides a smaller amount of rotational movement of
the secondary rotary axis on a singular point is selected as the angle
of the rotary axis for implementing the tool axial vector specified during
tool tip point control.
(Both positive and negative signs are available for the primary rotary
axis.)
Example:
C = 0C = 0
B = positive B = negativeB = 0
7 6 5 4 3 2 1 0
Return to Library