Specifications

PARAMETER 2
2-149
Classification
USER
Display title
EIA/ISO
Address Meaning Description
—
Program type M, E
Conditions After stop of movement
F163
Unit Bit
Setting range Binary, eight digits
Bar feeder scheduling function
0: Invalid
1: Valid
Incorporation of wear offset data into the current
position display in EIA/ISO program mode
0: Invalid
1: Valid
Incorporation of wear offset data into the current
position display in MAZATROL program mode
0: Valid
1: Invalid
Position of thread turning tool nose on solid
drawing
0: Tool tip
1: Position measured using TOOL EYE
Barrier check on solid drawing
0: Invalid
1: Valid
Menu on the DATA I/O display (floppy disk)
0: Hidden
1: Displayed
Menu on the DATA I/O display (tape)
0: Hidden
1: Displayed
Menu on the DATA I/O display (CMT)
0: Hidden
1: Displayed
—
Program type M
Conditions After stop of movement
F164
Unit Bit
Setting range Binary, eight digits
Automatic tool data setting conditions
Search for magazine (turret) tool
No search for invalid tool
No search for broken tool
No search for tool that has expired in life
No search for tool for which life warning has been
issued
Note:
This parameter is used for automatic setting of the following tool data
during MAZATROL program editing:
- “Nominal diameter” and “Suffix” in tool sequence of turning tool
- “Suffix” in tool sequence of point machining
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
Return to Library