Specifications

2 PARAMETER
2-154
Classification
USER
Display title
SOFT LIMIT
Address
Meaning
Description
—
Program type —
Conditions —
I8
Unit —
Setting range —
Invalid
Function for making the G0 speed variable
Variable control area lower limit
Program type M, E
Conditions Immediate
I9
Unit
0.0001 mm/0.00001 inch/
0.0001°
Setting range 0 to 99999999
(%)
100
0
I7 I7
I9
I10
Override
A
xis position
I5
Function for making the G0 speed variable
Variable control area upper limit
Program type M, E
Conditions Immediate
I10
Unit
0.0001 mm/0.00001 inch/
0.0001°
Setting range 0 to 99999999
(%)
100
0
I7 I7I9
I10
Override
A
xis position
I5
Rotary center of a workpiece
Program type E
Conditions After stop of movement
I11
Unit
0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
Set the rotary center of a workpiece at a table angle of 0° for each axis in
the machine coordinate system. (Valid only with dynamic offset function
and in manual operation)
Note:
For the axes which operate in submicrons in the case of submicron
machine specifications, the setting unit of this parameter is reduced to
1/10 times.
Return to Library