Specifications

PARAMETER 2
2-161
Classification
USER
Display title
SYSTEM
Address Meaning
Description
Movement of axes during approach
Program type M
Conditions Immediate
SU11
Unit —
Setting range 0, 1
Specify the types of axes to be simultaneously moved when approaching
the tool to the next machining area.
0: Three axes (X, Y, Z) move at the same time.
1: After Z-axis movement, the X-axis and the Y-axis move at the same
time.
<Supplementary description>
This parameter is valid only when “workpiece scheme” is selected in the
common unit. If “initial-point scheme” is selected, three axes move
simultaneously, irrespective of setting of this parameter.
Rotating position specified in the index unit
after tool change
Program type M
Conditions Immediate
SU12
Unit —
Setting range 0, 1, 2
Select the rotating position specified in the index unit after tool change.
0: After the tool change, rotation occurs at the position specified in the
index unit. For the movement from the completing position of the
tool change to the rotating position of the index unit, three axes (X,
Y, Z) move at the same time.
1: After the tool change, rotation occurs at the position specified in the
index unit. For the movement from the completing position of the
tool change to the rotating position of the index unit, the X-axis and
the Y-axis move at the same time following completion of Z-axis
movement.
2: After the tool change, rotation occurs at the completing position of
the tool change.
Axis name of the transfer axis
Program type M, E
Conditions After stop of movement
SU13
Unit —
Setting range &0 to &7F
Set the axis name of the transfer axis.
Tool nose mark display color on the TOOL
PATH CHECK display/TRACE display
Program type M, E
Conditions After stop of movement
SU14
Unit —
Setting range 0 to 6
Set the display color for the tool nose marks in each system indicated on
the TOOL PATH CHECK and TRACE displays.
0 : Red (default)
1 : Green
2 : Blue
3 : Yellow
4 : Pink
5 : Cyan
6 : White
Return to Library