Specifications

PARAMETER 2
2-165
Classification
USER
Display title
SYSTEM
Address Meaning
Description
Cutting depth in the composite-type fixed
cycle (G271/G272, G71/G72)
Program type E
Conditions Immediate
SU103
Unit 0.0001 mm/0.00001 inch
Setting range 0 to 65535
If a cutting depth has not been specified in the program, operation will
occur in accordance with the setting of this parameter.
SU103
Pecking return distance in groove cutting
unit and grooving (G274/G275, G74/G75)
Program type M, E
Conditions Immediate
SU104
Unit
0.0001 mm/rev
0.00001 inch/rev
Setting range 0 to 65535
NM211-00248
SU104
Tool
Cut depth (diametral value) for final cut in
thread cutting unit
Cut depth (diametral value) for final cut in
composite-type thread cutting cycle G276,
G76
Program type M, E
Conditions Immediate
SU105
Unit 0.0001 mm/0.00001 inch
Setting range 0 to 65535
(
n/2-1
)
th cut
(
n/2
)
th cut
nth cut
1st cut
NM211-00247
SU105
Minimum cut depth clamping value in
thread cutting unit and composite-type
thread cutting cycle G276
Program type M, E
Conditions Immediate
SU106
Unit 0.0001 mm/0.00001 inch
Setting range 0 to 65535
Clamping will follow the setting of
SU106 if the calculated value of the cut
depth with the threading unit is smaller than the setting of
SU106. This
parameter is valid only for the infeed operation of the fixed-area scheme.
Clamping will follow the setting of
SU106 if the calculated value of the cut
depth with the composite type thread cutting cycle G276 is smaller than
the setting of
SU106. This parameter is valid only for the infeed operation
of the fixed volume chip production scheme.
Return to Library