Specifications

PARAMETER 2
2-167
Classification
USER
Display title
SYSTEM
Address Meaning
Description
—
Program type E
Conditions After stop of movement
SU153
(bit 0)
Unit —
Setting range 0, 1
- If the command block of G284/G288 (machining G-codes,
F30 = 0) or of
G84/G88 (turning G-codes,
F30 = 1) does not contain spindle
forward/reverse rotation M-codes, one of the following M-codes will be
output, depending on the status of bit 0 in parameter
SU153:
- If 0 is set in
BA59, 3 will be regarded as having been set, and M03 will
be output.
- If 0 is set in
BA60, 4 will be regarded as having been set, and M04 will
be output.
—
Program type —
Conditions —
SU154
to
SU168
Unit —
Setting range —
Invalid
BA59 = 3
BA60 = 4
BA59 = 203
BA60 = 204
0 Tapping cycle of turning Tapping cycle of milling
SU153
bit 0
1
Inverse tapping cycle of
turning
Inverse tapping cycle of
milling
Return to Library