Specifications

2 PARAMETER
2-182
Classification
USER
Display title
TURNING
Address Meaning
Description
Pecking return distance in turning-drilling
unit
Program type M
Conditions Immediate
TC47
Unit 0.001 mm/0.0001 inch
Setting range 0 to 65535
NM211-00252
P
1
: Start point
P
2
: End point
D
n
(n = 1 to 4) = Cut depth
D
4
D
3
D
2
D
1
P
1
P
2
G1
G0
TC47
TC47
TC47
Drilling cut depth clamp value in turning-
drilling unit
Program type M
Conditions Immediate
TC48
Unit 0.001 mm/0.0001 inch
Setting range 0 to 65535
Minimum turning-drilling cut depth is set.
(
!TC46)
Spindle speed clamp value in cutting off
cycle (
GRV)
Program type M
Conditions Immediate
TC49
Unit min
–1
(rpm)
Setting range 0 to 65535
If 0 or 1 is set up in
TC50:
This value will be used as the spindle speed clamp value in cutting off
cycle (#4/#5).
If 2 or more is set up in
TC50:
Immediately before the cutting off area (*) is reached during the cutting off
cycle, this value will be used as the spindle speed clamp value. Within the
cutting off area, however, machining will be executed at the speed
corresponding to this value.
*: Cutting off area = (Starting position X – Ending position X) ×
TC9/100
Return to Library