Specifications

2 PARAMETER
2-190
Classification
USER
Display title
TURNING
Address Meaning
Description
Return distance (radial value) in X-axis at
wall during rough cutting in bar cutting unit
or in corner machining unit of MAZATROL
programs
Program type M
Conditions Immediate
TC67
Unit 0.001 mm/0.0001 inch
Setting range 0 to 65535
Return distance in Z-axis at wall during
rough cutting in bar cutting unit or in corner
machining unit of MAZATROL programs
Program type M
Conditions Immediate
TC68
Unit 0.001 mm/0.0001 inch
Setting range 0 to 65535
Example 1: Standard type cutting
Prior to cutting up along the wall in the end of final cycle, escape will be
made by specified distance.
TC68
TC67
Example 2: High speed rough cutting
Escape will be made by TC67 and TC68 specified distance during return
after reaching the wall.
TC67
TC67
Number of revolutions during dwell for
pecking of grooving
Program type M
Conditions Immediate
TC69
Unit Revolutions
Setting range 0 to 255
Set number of revolutions during dwell for each cutting operation for
machining #0, #1, #2, #3, #4, or #5 groove (GRV unit) with pecking return
distance (
TC74) of 0.
The tool stops moving until the spindle makes revolutions set in this
parameter.
FLASH tool
— Number of cutting edges to be used for
the tool not registered in the tool file
Program type M
Conditions Immediate
TC70
Unit Number of cutting edges
Setting range 0 to 99
Number of cutting edges to be used if the tool file data for the
corresponding tool is not yet registered during FLASH tool selection.
Return to Library