Specifications

2 PARAMETER
2-196
Classification
USER
Display title
TURNING
Address Meaning
Description
Returning operation after machining
specified in the END unit
Program type M
Conditions Immediate
TC98
Unit —
Setting range 0 to 2
Specify the sequence of the returning operation set in the
ATC and
RETURN items in the END unit for machines with the lower turret.
TC98 = 0:
The upper and lower turrets return simultaneously.
TC98 = 1:
The upper turret returns prior to the lower turret.
TC98 = 2:
The lower turret returns prior to the upper turret.
The setting is regarded as “0” if out of range.
ATC operation after machining when not
specified in the END unit
Program type M
Conditions Immediate
TC99
Unit —
Setting range 0 to 2
Specify the ATC operation after machining when the
ATC item in the END
unit is not set.
TC99 = 0:
The same operation as when the item is set to “0” is followed.
(The tool is not returned.)
TC99 = 1:
The same operation as when the item is set to “1” is followed.
(The tool is returned and axes move to the returning position.)
TC99 = 2:
The same pattern as when the item is set to “2” is followed.
(The axes move to the returning position and the tool is returned).
The setting is regarded as “0” if out of range.
—
Program type —
Conditions —
TC100
Unit —
Setting range —
Invalid
Selection of droop sampling axis
(For detecting imbalance)
Program type E
Conditions At power on
TC101
Unit —
Setting range 0 to 16
Select a droop sampling axis.
Return to Library