Specifications

2 PARAMETER
2-204
Classification
USER
Display title
TURNING
Address Meaning
Description
Selection whether an alarm is to be issued
if the ending position of workpiece pressing
is reached during transfer of the workpiece
Program type M, E
Conditions Immediate
TC142
(bit 5)
Unit —
Setting range 0, 1
TC142 (bit 5) = 0:
An alarm will not be issued even if the ending position of workpiece
pressing is reached during the transfer of the workpiece.
TC142 (bit 5) = 1:
An alarm will be issued if the ending position of workpiece pressing is
reached during the transfer of the workpiece.
—
Program type M
Conditions Immediate
TC142
(bit 6)
Unit —
Setting range 0, 1
TC142 (bit 6) = 0:
When the workpiece is transferred as specified in the workpiece transfer
unit of the MAZATROL program, the X-axis moves to the machine zero
point.
TC142 (bit 6) = 1:
When the workpiece is transferred as specified in the workpiece transfer
unit of the MAZATROL program, the X-axis moves to the third zero point.
—
Program type M
Conditions Immediate
TC142
(bit 7)
Unit —
Setting range 0, 1
Upper turret retraction druing machining with the lower turret (for
MULTIPLEX series)
TC142 (bit 7) = 0:
Upper turret retraction to the X-axis zero point
TC142 (bit 7) = 1:
Upper turret retraction invalid
Whether the end tool of the long boring bar
can be changed
Program type M, E
Conditions Immediate
TC143
Unit Bit
Setting range Binary, eight digits
Whether the end tool of the long boring bar can be changed by ATC
(1: Changeable, 0: Not changeable)
(1 : Changeable, 0 : Not changeable)
Long boring bar No. 1
Long boring bar No. 2
Long boring bar No. 3
Long boring bar No. 4
Long boring bar No. 5
Long boring bar No. 6
7 6 5 4 3 2 1 0
Return to Library