Specifications

PARAMETER 2
2-211
Classification
MACHINE
Display title
MEASURE
Address Meaning Description
Shaping control axis
Program type E
Conditions Immediate
Unit Axis
K3
Setting range 3 to 13
Identification number of the shaping control axis
Specify the shaping control axis as follows:
Example:
Set “4” for a three-axis machine.
Set “5” for a four-axis machine.
Note:
Set the type of the axis which has been set on this parameter to the
rotational axis (M17 bit 4 = 1).
—
Program type —
Conditions —
K4
to
K6
Unit —
Setting range —
Invalid
Unbalanced axis
Program type M
Conditions Immediate
K7
Unit —
Setting range 1, 2, 4
Specify the axis that moves vertically
1 : The X-axis acts as the unbalanced axis.
2 : The Y-axis acts as the unbalanced axis.
4 : The Z-axis acts as the unbalanced axis.
—
Program type —
Conditions —
K8
K9
Unit —
Setting range —
Invalid
Return to Library