Specifications

PARAMETER 2
2-215
Classification
MACHINE
Display title
MEASURE
Address Meaning Description
Coefficient to determine rotation angle
when retrying measurement C reference
face
Program type M
Conditions Immediate
K21
Unit %
Setting range 1 to 1000
During approach operation to measurement start point, if touch sensor is
actuated, the C-axis will rotate by angle determined by the measurement
object shape angle and setting value K21.
Example:
CW programmed as measurement direction
α : Measurement object shape
angle
β : α × K21/100
ON
C-axis rotation by angle
β in this direction
β
α
NM211-00261
Measurement retry frequency when retrying
reference face C measurement
Program type M
Conditions Immediate
K22
Unit Times
Setting range 0 to 255
When touch sensor is actuated before reaching target point in C offset
measurement, set retry frequency.
When K22 is set to N (N = 0 to 255), measurement alarm will be indicated
when touch sensor is actuated before reaching measurement target point
in (N+1)th retry operation.
Retry frequency for workpiece
measurement
Program type M
Conditions Immediate
K23
Unit Times
Setting range 0 to 99999
Specify the number of times the workpiece measurement is to be retried if
a measurement error occurs.
Fixed value
Program type —
Conditions —
K24
to
K28
Unit —
Setting range —
Reserved within the system.
Setting prohibited
Return to Library