Specifications

2 PARAMETER
2-230
Classification
MACHINE
Display title
MEASURE
Address Meaning Description
—
Program type M, E
Conditions After stop of movement
K95
Unit Bit
Setting range Binary, eight digits
Fixed value (0)
Tool position compensation during T-command
execution
0: Not performed
1: Performed
Coordinate system update during handle pulse
interrupt
0: Not performed
1: Performed
Fixed value (0)
Acceleration/deceleration time constant for handle
pulse feed
0: Time constant for cutting feed
1: No time constant
Software limits for G30 execution
0: Invalid
1: Valid
In-position check
0: Invalid
1: Valid
—
Program type M, E
Conditions After stop of movement
K96
Unit Bit
Setting range Binary, eight digits
G0 command in-position check
0: Check
1: Non-check
Timing of manual free feed finish signal
0: Smoothing
1: Distribution finish (equivalent to DEN)
Fixed value (0)
Axis/Cutting interlock alarm display
0: Valid
1: Invalid
Suppression of lost motion in modes other than the
G1 command mode
0: Valid
1: Invalid
Fixed value (0)
Fixed value (0)
Fixed G0 inclination
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
Return to Library