Specifications

PARAMETER 2
2-233
Classification
MACHINE
Display title
MEASURE
Address Meaning Description
Laser tool length/diameter measurement
Program type M, E
Conditions Immediate
K104
Unit —
Setting range 0, 1
Output of a laser measurement B-axis 0-degree
command after ATC
0: Output invalid
1: Output valid
Direction of the laser axis of the laser measuring
instrument
0: Depends on the setting of parameter L16. L16 =
1: Parallel to the Y-axis,
L16 = 2: Parallel to the X-axis
1: Depends on the setting of bit 2 in parameter
K104.
Direction of the laser axis of the laser measuring
instrument
0: Parallel to the Y-axis
1: Parallel to the X-axis
Note: This parameter is valid when K104 bit 1 = 1.
Voice Adviser (Vocal output function)
0: Invalid
1: Valid
Type of voice
0: Male’s voice
1: Female’s voice
Vocal guidance for warm-up operation
0: Invalid
1: Valid
Setting rapid feed override to 0% when cutting feed
override is set to 0%
0: Valid
1: Invalid
—
Program type M, E
Conditions At power on
K105
Unit Bit
Setting range Binary, eight digits
Fixed value (1)
0: S-code macro call invalid
1: S-code macro call valid
0: T-code macro call invalid
1: T-code macro call valid
0: Second auxiliary function macro call invalid
1: Second auxiliary function macro call valid
Fixed value (0)
0: Input in millimeter
1: Input in inch
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
Return to Library