Specifications

2 PARAMETER
2-238
Classification
MACHINE
Display title
MEASURE
Address Meaning Description
Horizontal axis rotational center offset of
the first rotary axis
(Tool tip point control)
Program type E
Conditions Immediate
K122
Unit
0.0001 mm
Setting range ±99999999
<If the first rotary axis rotates for tool control>
Set the distance from the rotational center of the tool control rotary axis (at
the tool side) in the direction of the horizontal axis to the rotational center
of the tool control rotary axis (at the opposite side).
<If the first rotary axis rotates for table control>
Set the distance from the spindle tip point in the direction of the horizontal
axis to the rotational center of the table control rotary axis (at the opposite
side) when all axes are in the machine home position.
Vertical axis rotational center offset of the
first rotary axis
(Tool tip point control)
Program type E
Conditions Immediate
K123
Unit
0.0001 mm
Setting range ±99999999
<If the first rotary axis rotates for tool control>
Set the distance from the rotational center of the tool control rotary axis (at
the tool side) in the direction of the vertical axis to the rotational center of
the tool control rotary axis (at the opposite side).
<If the first rotary axis rotates for table control>
Set the distance from the spindle tip point in the direction of the horizontal
axis to the rotational center of the table control rotary axis (at the opposite
side) when all axes are in the machine home position.
Height axis rotational center offset of the
first rotary axis
(Tool tip point control)
Program type E
Conditions Immediate
K124
Unit
0.0001 mm
Setting range ±99999999
<If the first rotary axis rotates for tool control>
Set the distance from the rotational center of the tool control rotary axis (at
the tool side) in the direction of the height axis to the rotational center of
the tool control rotary axis (at the opposite side).
<If the first rotary axis rotates for table control>
Set the distance from the spindle tip point in the direction of the height axis
to the rotational center of the table control rotary axis (at the opposite side)
when all axes are in the machine home position.
Axis number of the second rotary axis
(Tool tip point control)
Program type E
Conditions Immediate
K125
Unit —
Setting range 0 to 16
Set the axis number of the second rotary axis.
A setting of 0 is invalid.
Return to Library