Specifications

PARAMETER 2
2-239
Classification
MACHINE
Display title
MEASURE
Address Meaning Description
Horizontal axis rotational center offset of
the second rotary axis
(Tool tip point control)
Program type E
Conditions Immediate
K126
Unit 0.0001 mm
Setting range ±99999999
<If the second rotary axis rotates for tool control>
Set the distance from the spindle holder end in the direction of the
horizontal axis to the rotational center of the tool control rotary axis (at the
tool side).
<If the second rotary axis rotates for table control>
Set the distance from the rotational center of the table control rotary axis in
the direction of the horizontal axis to the rotational center of the table
control rotary axis (at the workpiece side) when all axes are in the
machine home position.
Vertical axis rotational center offset of the
second rotary axis
(Tool tip point control)
Program type E
Conditions Immediate
K127
Unit
0.0001 mm
Setting range ±99999999
<If the second rotary axis rotates for tool control>
Set the distance from the spindle holder end in the direction of the vertical
axis to the rotational center of the tool control rotary axis (at the tool side).
<If the second rotary axis rotates for table control>
Set the distance from the rotational center of the table control rotary axis in
the direction of the vertical axis to the rotational center of the table control
rotary axis (at the workpiece side) when all axes are in the machine home
position.
Height axis rotational center offset of the
second rotary axis
(Tool tip point control)
Program type E
Conditions Immediate
K128
Unit
0.0001 mm
Setting range ±99999999
<If the second rotary axis rotates for tool control>
Set the distance from the spindle holder end in the direction of the height
axis to the rotational center of the tool control rotary axis (at the tool side).
<If the second rotary axis rotates for table control>
Set the distance from the rotational center of the table control rotary axis in
the direction of the height axis to the rotational center of the table control
rotary axis (at the workpiece side) when all axes are in the machine home
position.
—
Program type —
Conditions —
K129
to
K144
Unit —
Setting range —
Invalid
Return to Library