Specifications

PARAMETER 2
2-241
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Z-axis stroke for tip position memory
(TEACH function)
Program type M, E
Conditions Immediate
L5
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
The distance from the spindle taper gage line to the table surface, No. 1
turning spindle chuck edge, or the reference block on the pallet existing
when the Z-axis is in the machine zero-point position
MPL095
Table
Pallet
L5
L5
Machine
zero point
Machine
zero point
Spindle
Spindle
Reference block
L5
Spindle
ed
g
e
(Model H, e type)
Chuck edge
Machine
zero point
L5
Table
Machine
zero point
Spindle
edge
(Model V, e type)
Tool-breakage judgment distance for TBR
function
Program type M, E
Conditions Immediate
L6
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
The minimum tool displacement by which the tool is judged to be a broken
one as a result of execution of the tool breakage detection function
If (registered tool length data) – (tool length data that has been measured
during the detecting operation) ≥ L6, then the tool is judged broken.
Tool-breakage restoration mode for TBR
function
Program type M, E
Conditions Immediate
L7
Unit —
Setting range 1 to 3
The parameter for selecting the type of restoration to be performed after
tool breakage has been detected as a result of execution of the tool
breakage detection function
1: Single-block stop
2: Machining restarts from the next process.
3: Single-block stop occurs in a state where machining can be
restarted from the next process.
Return to Library