Specifications

2 PARAMETER
2-242
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Skipping stroke limit for MMS
Program type M, E
Conditions Immediate
L8
Unit 0.0001 mm/0.00001 inch
Setting range 0 to 99999999
The maximum skipping movement distance for the measurement with the
MMS unit
An alarm message will appear if the touch sensor has not come into
contact with the workpiece within this distance.
Selection of random ATC specifications
Program type M, E
Conditions At power on
L9
Unit —
Setting range 0, 1
Set to 1 when the machine of the random ATC specifications is used.
0: Standard machine
1: Machine of random ATC specifications
Interval between magazine pockets
Program type M, E
Conditions Immediate
L10
Unit 1 mm/0.1 inch
Setting range 0 to 999
Set the interval between magazine pockets.
L10
MPL511
Touch sensor’s interference direction
Program type M, E
Conditions Immediate
L11
Unit —
Setting range 0 to 2
Set the touch sensor's interference direction.
0: Non-interference (normal diameter)
1: To jut out in the direction of a pocket of higher number (Positive
direction of magazine)
2: To jut out in the direction of a pocket of lower number (Negative
direction of magazine)
Return to Library