Specifications
PARAMETER 2
2-247
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Timer setting for manual TOOL EYE
measurement
Program type M, E
Conditions Immediate
L27
Unit 3.5 msec
Setting range 0 to 65535
During manual TOOL EYE measurement, even if the sensor turns on for a
time shorter than that which has been specified in this parameter, that will
not be regarded as sensor-on.
Amount of Z-axial escape from the
approach point after TOOL EYE
measurement
Program type M, E
Conditions Immediate
L28
Unit 0.0001 mm/0.00001 inch
Setting range ±99999999
Under the machine configuration where, after automatic tool
measurement with the TOOL EYE, the cover of the TOOL EYE will
interfere with the tool if the cover is closed with the tool present at the
measuring approach point, enter the distance through which the tool is to
be moved in the Z-axial direction before the cover is closed following
completion of the measurement.
In the case of MAZATROL programs, when the measurement is
completed, the tool will be moved through the L28-specified distance from
the approach point before the cover is closed.
In the case of EIA/ISO programs, when execution of the G136 command
is completed, the tool will be moved through the L28-specified distance
from the approach point. The cover will be closed by execution of M284 in
the next block onward.
ツール
アイ
TOOL EYE #1
approach point
AP1
K20
K20 K20
TOOL
EYE
L28
L28
L28
L28
Z
X
K20
TOOL EYE #1
approach point
AP2
TOOL EYE #3
approach point
AP3
TOOL EYE #4
approach point
AP4
Machine efficiency
Program type M
Conditions Immediate
L29
Unit %
Setting range 0 to 100
Set machine efficiency. This value is used as average output calculation
data for machining navigation. If the setting is 0, machine efficiency will
become 90%.
Return to Library