Specifications

2 PARAMETER
2-248
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Selection of machining navigation case
introduction messages
Program type M, E
Conditions Immediate
L30
Unit —
Setting range 0 to 999
Select for each machine model the appropriate case introduction
messages on MACHINING NAVIGATION-PREDICTION display.
Specific data is preset for each machine model. Do not disturb the
presettings.
—
Program type —
Conditions —
L31
to
L36
Unit —
Setting range —
Invalid
Minimum index angle of index table
Program type M
Conditions At power on
L37
Unit 1°
Setting range 0 to 180
For the command to rotate the index table, specify the minimum index
angle for angle command by the M-code or B-code.
Note:
This parameter is ineffective for the system with an NC rotary table.
M/B-code for index of index table
Program type M
Conditions At power on
L38
Unit —
Setting range 0 to 9999
For the command to rotate the index table, select the turning direction and
the M-code number to be output.
0 or 1: B-code (0: Turning in the direction of CW,
1: Turning in the direction of CW/CCW/shortcut)
2 to 9999: M-code (Numeric value is the M-code number to be
output)
Notes:
1. This parameter is ineffective for the system with an NC rotary table.
2. Turning direction of the index table can be selected in the indexing
unit only when this parameter is set to 1.
Return to Library