Specifications

PARAMETER 2
2-249
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Selection of execution/non execution of
indexing unit
Program type M
Conditions At power on
L39
Unit —
Setting range 0, 1
Specify the execution condition of the indexing unit.
Execution of the indexing unit just before starting of machining of each
tool sequence or at the end of each process:
0: Won’t be made when the index angle is the same as the preceding
indexing unit execution.
1: Will be made unconditionally.
Availability of specification of index table
angle in end unit
Program type M
Conditions Immediate
L40
Unit —
Setting range 0, 1
Select availability to specify the index table angle in the end unit.
0: Enables to specify the angle.
1: Prohibits to specify the angle.
Note:
Set to 0 only for index table specification.
Simultaneous operation of indexing unit
with ATC
Program type M
Conditions At power on
L41
Unit —
Setting range 0 to 2
For execution of the indexing unit, specify the commanding order for
movement to turning position, turning of the table and ATC.
0: Movement to turning position → Table turning → ATC
1: Movement to turning position → Table turning and ATC
2: Movement to turning position, table turning and ATC
simultaneously take place.
Note:
In case of setting to 2, only the X-axis coordinates can be set at turning
position of the indexing unit.
Initial value of index table angle
Program type M
Conditions Immediate
L42
Unit —
Setting range 0, 1
Select setting of the initial value (modal) of the index table angle for cyclic
operation.
0: Actual table angle of the machine
1: Table angle indexed at present taken as 0°
Return to Library