Specifications

2 PARAMETER
2-250
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Indication of index table angle
Program type M, E
Conditions Immediate
L43
Unit —
Setting range 0, 1
Select showing or not showing of the index table angle on the POSITION
display.
0: Not to show
1: To show
Note:
Set to 1 for the machine with the index table, or set to 0 for that of the NC
rotary table.
Selection of automatic setting on/off for
nose position correction of a drilling tool
Program type M, E
Conditions Immediate
L44
Unit —
Setting range 0, 1
Select whether automatic setting of the amount of tool nose position
correction is to be made valid or invalid when entering the length of a
drilling tool in the tool data or when measuring the tool length in the MDI
mode.
0: Automatic setting valid
1: Automatic setting invalid
Index table angle command
Program type —
Conditions —
L45
Unit —
Setting range 0 to 8
Set the minimum unit of index table angle command for INDEX units,
ANGLE in END units and B-codes in MANL PRG unit.
0: 1-deg
1 to 8: 1/1000 deg (MRJ2-CT specifications)
Note:
Index table angle display on the POSITION display is valid only when L43
= 1 (index table angle display on).
0: 1-deg index table
1 to 7: Nth axis under MRJ2-CT specs. (N = 1 to 7)
8: Positioning table
Maximum number of pallets in pallet
changing unit
Program type M
Conditions At power on
L46
Unit —
Setting range 0 to 255
Select change or no change of the pallet and specify the maximum
number of pallets.
0 or 1: Not to change pallet
2 to 255: To change pallet (Numeric value indicates the maximum
number of pallets.)
Note:
When this parameter is set to 0 or 1, use of the pallet changing unit is
prohibited.
Return to Library