Specifications

PARAMETER 2
2-251
Classification
MACHINE
Display title
TABLE
Address Meaning Description
To prepare or not to prepare next pallet
change
Program type M
Conditions At power on
L47
Unit —
Setting range 0, 1
Select preparation of next pallet or not to do so according to the pallet
change mechanism.
0: Not to prepare next pallet
1: To prepare next pallet
Note:
When this parameter is set to 1, it is possible to set the number of the next
pallet in the pallet changing unit.
Number of long boring bars
Program type M, E
Conditions Immediate
L48
Unit —
Setting range 0 to 9
Specify the number of long boring bars mounted.
Simultaneous operation of pallet change
with ATC
Program type M
Conditions Immediate
L49
Unit —
Setting range 0, 1
This parameter is used to select simultaneous operation of pallet change
with the next ATC operation in execution of the pallet changing unit and
the face definition unit, or not.
0: To operate ATC after pallet change
1: To operate pallet change and ATC simultaneously
Rewriting of head number
Program type —
Conditions Immediate
L50
Unit —
Setting range 0, 1
Rewriting of head number in MDI mode:
0: Impossible
1: Possible
(For five surface machining)
Return to Library