Specifications

PARAMETER 2
2-255
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Head relay point X1
Program type M
Conditions Immediate
L62
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
Head relay point Y1
Program type M
Conditions Immediate
L63
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
Head relay point X2
Program type M
Conditions Immediate
L64
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
Head relay point Y2
Program type M
Conditions Immediate
L65
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
When FIXED is selected at the item RELAY in the face definition unit, the
head arrives at the face for next machining through the point(s) specified
by the parameters (to be set in the machine coordinates sytem).
For AGX machines, the relay points (X1, Y1) and (X2, Y2) can be
specified in the program (in the face definition sequence).
For the five surface machining, the head goes through the four corners of
a face where the two specified points are positioned in its diagonal line.
(X1, Y1)
(X2, Y2)
X
Z
Y
MPL515
(For five-surface machining)
(For AGX series)
Return to Library