Specifications

2 PARAMETER
2-256
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Return/No return to head indexing point Z
Program type M
Conditions Immediate
L66
Unit —
Setting range 0, 1
After EIA/ISO subprogram execution;
0: Return to head indexing point Z (Even if the T-code command is for
the same tool.)
1: No return to head indexing point Z
(For five-surface machining)
(For AGX series)
Length between the end surface of the
spindle and the center of head rotation
Program type M, E
Conditions Immediate
L67
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
Set the length from the end surface of the spindle to the center of head
rotation for respective machines. (100 mm in usual)
Y
L67
Z
α
= 0°
α
= 180°
MPL516
Head correction value X
Program type M, E
Conditions Immediate
L68
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
Set for respective machines.
α
= 0
°
Y
X
α
= 180
°
L68
MPL517
(For AGX series)
Head correction value Y
Program type M, E
Conditions Immediate
L69
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
Set for respective machines.
(For AGX series)
Return to Library