Specifications

PARAMETER 2
2-257
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Axis movement from machining face on
escapement
Program type M
Conditions Immediate
L70
Unit —
Setting range 1, 0
Specify the axes that simultaneously move from a machining face to the
next machining face or in case of tool replacement.
0: Two (three) axes simultaneously move to the safety position.
1: Y-axis (or X- and Y-axes) moves to the safety position after Z-axis
moved.
The X-axis moves when a relay point (RELAY) or a fixed point (FIXED) is
selected for the item RELAY in the face definition unit.
(For AGX series)
Shift of basic coordinate for oblique face
machining
Program type M, E
Conditions Immediate
L71
Unit —
Setting range 1, 0
For execution of the program for oblique face machining, specify to
execute or not machining on the coordinate that is turned from the basic
corrdinate (set in WPC unit or in OFFSET unit) at an angle of the
correction value for the B-axis.
0: Machining on the coordinate that is turned from the basic
coordinate at an angle of the correction value for the B-axis
1: Machining on the basic coordinate specified in the program
(For AGX series)
—
Program type —
Conditions —
L72
Unit —
Setting range —
Invalid
Time constant for shape correction
acceleration/deceleration filter 2
Program type M, E
Conditions After stop of axis movement
L73
Unit msec
Setting range 0 to 56
Set the time constant to be used when shape correction is on.
A setting of 0 is invalid.
Return to Library