Specifications

2 PARAMETER
2-260
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Table thickness
Program type M, E
Conditions Immediate
L82
Unit
0.0001 mm
Setting range ±99999999
Set the thickness of the tilting table.
This parameter is used for the software travel limit function provided to
avoid collision between the spindle head and the tilting table (in its angular
position from –90° to –120°).
Tilting table
L82
(For machines equipped with a tilting table)
Spindle head radius
Program type M, E
Conditions Immediate
L83
Unit
0.0001 mm
Setting range ±99999999
Set the radius of the spindle head.
This parameter is used for the software travel limit function provided to
avoid collision between the spindle head and the tilting table.
L83
(For machines equipped with a tilting table)
Correction value of alignment deviation X
(Upper face)
Program type M
Conditions After stop of movement
L84
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
Correction value of alignment deviation Y
(Upper face)
Program type M
Conditions After stop of movement
L85
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
2
#
My
2
#
Mx
ex
ey
Spindle center
Stylus
MPL519
ex: Alignment deviation correction value on X-axis
ey: Alignment deviation correction value on Y-axis
Mx: Stylus radius in the X-axis direction (The setting of L3)
My: Stylus radius in the Y-axis direction (The setting of L4)
Note:
The data is set automatically by execution of calibration measurement (on
the upper face) with the MMS unit.
(For five-surface machining)
Return to Library