Specifications

2 PARAMETER
2-268
Classification
MACHINE
Display title
TABLE
Address Meaning Description
Tailstock type
Program type M, E
Conditions Immediate
L107
(bit 2)
Unit —
Setting range 0, 1
Select whether the tailstock included in the tailstock-equipped machine
specifications is of the conventional type or the motor-driven type.
0: Conventional type
1: Motor-driven type
Whether tail thrust is also to be displayed in
pounds (lbs)
Program type M, E
Conditions Immediate
L107
(bit 3)
Unit —
Setting range 0, 1
Select whether the tail thrust is also to be displayed in pounds (lbs).
0: Display off
1: Display on
—
Program type M
Conditions Immediate
L107
(bit 4)
Unit —
Setting range 0, 1
LBB No. setting for the grooving I.D. tool, threading I.D. tool, or touch
sensor
0: Invalid
1: Valid
XYZ-axis operation for the first T-command
after cycle start
Program type M, E
Conditions Immediate
L107
(bit 5)
Unit —
Setting range 0, 1
0: Moves the X-axis to the third zero point and the Y/Z-axes to the
respective zero points.
1: Moves the X-axis to the third zero point and the Y/Z-axes to the
respective second zero points.
(For AGX series)
Return to Library