Specifications

PARAMETER 2
2-295
Classification
MACHINE
Display title
TIME CONST.
Address Meaning Description
Cutting feed time constant for superposition
Program type M, E
Conditions After stop of movement
N28
Unit 1 msec
Setting range 4 to 1800
Set the cutting feed (linear acceleration/deceleration) time constant for
superposition control.
Note:
Set the same value for all axes.
Time constant for shape correction rapid
feed acceleration/deceleration filter
Program type M, E
Conditions After stop of movement
N29
Unit msec
Setting range 0 to 455
Use of this parameter allows further smoothening of the speed signal
waveform during rapid feed with shape correction on.
The filter will be invalid if 0 is set.
Cutting feed time constant for time constant
changeover M-code command
N30: for M881 command
N31: for M882 command
N32: for M883 command
N33: for M884 command
N34: for M885 command
N35: for M886 command
Program type M, E
Conditions After stop of movement
N30
to
N35
Unit msec
Setting range 0 to 1800
Set the cutting feed time constant for a time constant changeover M-code
command.
Feed rate
N30
to
N35
M3
Time
N30
to
N35
—
Program type —
Conditions —
N36
to
N48
Unit —
Setting range —
Invalid
Return to Library