Specifications

PARAMETER 2
2-297
Classification
MACHINE
Display title
ANOTHER
Address Meaning Description
Rotational center of the table
Program type M, E
Conditions At power on
S5
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
Set the position of the rotational center of the table in the machine
coordinates system.
S5
–Y
–X
S5
Notes:
1. Z-axis data are not required for a machine with a tilting table.
2. This parameter is used to execute the automatic program origin
calculation function (option) for a machine with a tilting table.
(For INTEGREX series)
(For dynamic offset)
(For HV machining)
(For machines equipped with a tilting table)
Absolute position detection parameter
Program type M, E
Conditions —
S6
Unit
0.0001 mm/0.00001 inch/
0.0001 deg
Setting range 0 to ±99999999
When movement is beyond the length set by this parameter during the
power off, it activates the alarm mode.
Upper limit (on Z-axis) of machining range
for table rotating maching Ι
Program type M, E
Conditions At power on
S7
Unit 0.0001 mm/0.00001 inch
Setting range 0 to ±99999999
This parameter specifies the range of rotating machining for the table
rotating machining Ι (X-B machining).
Set the upper limit (on Z-axis) of the machining range in the machine
coordinates system.
The machine recognizes that it is prohibited to move beyond this limit in
the negative direction.
(For HV machining)
Return to Library