Specifications

PARAMETER 2
2-301
Classification
MACHINE
Display title
ANOTHER
Address Meaning Description
—
Program type —
Conditions —
S20
S21
Unit —
Setting range —
Invalid
Cutting feed clamping speed during tool tip
point control
Program type E
Conditions After stop of movement
S22
Unit 1 mm/min (1°/min)
Setting range 1 to 200000
Specify the critical cutting feed rate to be used during tool tip point control.
During tool tip point control, speed is clamped in accordance with
parameter S22 or M3 (critical cutting feed rate), whichever is the smaller.
Reference workpiece zero point
Program type M, E
Conditions After stop of movement
S23
Unit
0.0001 mm/0.00001 inch
Setting range ±99999999
Set the position of a reference workpiece zero point for each axis in the
machine coordinate system.
S23
(Z)
S23
(X)
M
Z
X
Reference workpiece zero point
—
Program type —
Conditions —
S24
to
S48
Unit —
Setting range —
Invalid
Return to Library