Specifications

2 PARAMETER
2-306
Classification
MACHINE
Display title
SPINDLE
Address Meaning Description
—
Program type M, E
Conditions After stop of movement
SA46
Unit Bit
Setting range Binary, eight digits
Direction of orientation
00: Shorter route
01: Forward rotation
10: Reverse rotation
C-axis position control changeover type
00: After return to zero point
01: After deceleration stop
Synchronous tapping position control changeover
type
0: After return to zero point
1: After deceleration stop
Z-phase detection direction
0: Forward rotation
1: Reverse rotation
C-axis homing direction
00: Shorter route
01: Forward rotation
10: Reverse rotation
Synchronous tapping command polarity
0: Forward rotation
1: Reverse rotation
—
Program type M, E
Conditions At power on
SA47
Unit Bit
Setting range Binary, eight digits
0: Ignoring the spindle/motor gear ratio
1: Considering the spindle/motor gear ratio
Encoder signal input destination
Program type M, E
Conditions Immediate
SA48
Unit —
Setting range 0 to 2
Specify the encoder signal input destination.
0: Via the HDLC-connected axis (Spindle AMP feedback data)
1: Direct connection to encoder 1 (ENC1)
2: Direct connection to encoder 2 (ENC2)
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
Return to Library